Blue Rhino 235000 Owner's Manual download pdf (Page 11)

Contact 1.800.762.1142 for assistance.

Do not return to place of purchase.

Owner’s manual: model 235000 outdoor patio heater

Step 8 – Connect Gas Line to Engine

Attach gas line to control valve:

Pull collar of gas line back. (small arrow)

Insert gas line over control valve. (large arrow)

Release collar and it should lock in place. (Tip – push gas line up from bottom of post to

make a good seating before releasing the collar.)

Gently tug on line to test for proper connection. If gas line moves you are not properly

connected. Do not proceed until you have a proper connection.

Fully tighten the (4) screws from step 6.

Step 9 – Attach Top Dome to Emitter

Gently lay heater on its side using one styrofoam insert to prop

up top half.

Align holes in dome with threaded studs in emitter brackets.

Secure dome to emitter using 3 cap nuts (H). Tighten using 13 mm wrench.

Stand heater upright.

NOTE:

The white ceramic cone in the top of the engine is

an important piece. DO NOT REMOVE.

Step 10 – Secure Gas Line

Make sure angled side of gas clip pokes up through large hole in platform.

Tighten screw until gas line is held securely in place.

Stand heater upright.

Section View

Gas Line

Clip

Gas Line

Bottom View

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Blue Rhino 235000 Owner's Manual Page 11