Blue Rhino GWU501E Owner's Manual download pdf (Page 4)

Outdoor Patio Heater Model No. GWU501E Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

Step

Attach gas line clip

A. Lift shroud cover to expose platform.

B. Make sure gas line feeds through indent in gas line clip.

C. Attach gas line clip (N) to base platform using 2 medium screws (B), securing the

gas line without damaging the exposed bolts.

Step

Attach gas line/regulator assembly

Attach gas line/regulator assembly to gas line using 3/4” wrench.

Step

Assemble Dome

Note: Each dome section has a pin mounted in the rolled bottom edge. If necessary

for proper alignment of dome sections, loosen each screw prior to assembly.

A. Slide dome rib onto pin side of dome panel.

B. Slide two dome panels togther. Secure with small screw (A).

C. Repeat procedure for all three dome panels.

D. Insert large bolt (E) through dome plate, dome, top dome plate, large nut (I).

E. Tighten all screws on dome panels.

Step

Attach engine

A. Lay engine assembly and base assembly on their side, using carton for support.

B. Insert gas line through pole.

Note: Make sure gas line comes out bottom of pole before securing engine to pole.

C. Attach engine to post using 4 large screws (C).

Note: Do not fully tighten screws until all screws are in place.

1 2 3 4 5 6 7 8 9

No comments

Blue Rhino GWU501E Owner's Manual Page 4